Find a place for your weight plates with racks, trees and trolleys to suit your equipment and available space.
Read More
Start with your plates
Check the centre-hole diameter, plate thickness and largest outside diameter before choosing storage. A rack designed for one plate format may not fit another.
Measure the loaded footprint
Allow space for the plates as well as the empty rack, and room to remove them. For wall storage, follow the specified wall and fixing requirements; for trolleys, check the route and floor.
Compare usable capacity
Read the limits for each peg or slot and the complete unit. Check what is included and whether bars, plates or fixings are sold separately. The illustrations show generic configurations; use the retailer listing for the actual product.
Products To Compare
These are product types and configurations to compare, not ranked or hands-on tested recommendations. Buttons open Amazon UK searches. Illustrations are generic examples, not photographs of the items in those results.
Standard 1-inch plate racks
Check peg diameter against your standard plates and leave room to lift them off.
Olympic plate trees
Compare peg spacing and usable length for your mix of Olympic plates.
Horizontal plate racks with bar storage
Keep plates upright in separate slots; check the bar-holder fit too.
Extendable plate racks
An adjustable-length base can suit changing collections; compare its usable range.
Individual wall-mounted poles
Choose pole positions around your plates; confirm wall and fixing requirements.
Multi-pole wall racks
A single wall frame groups several plate positions; measure spacing before choosing.
Wheeled bumper-plate racks
Compare slot widths, wheels and manoeuvring room for upright bumper storage.
Vertical stacker trolleys
Stack plates flat around a central post; consider access to the lower plates.
Combined bar and plate trolleys
Store bars and plates together; compare holder sizes and the loaded footprint.
Studio pump-set racks
For several compact sets, compare plate pegs and bar storage with your equipment.
Before Choosing
- Plate-hole diameter, thickness and overall diameter.
- Usable peg lengths or slot widths, plus loaded footprint.
- Per-position and total load limits in the product instructions.
- Wall fixings, wheel requirements and included components.